sales@vsi.co.kr

Copyright 2023 All rights reserved.

12 Series Photo Ionizer

VSH-12Z/VSC-15Z

A high-output photo ionizer that can
rapidly neutralize static electricity

It is suitable for high output facilities that require the rapid
neutralization of static electricity.
In addition,
it allows the operator to connect it with a PC to identify ON/OFF,

operation hour of tube, failure, etc.

※ Be sure to install the head in a shielded facility.

Features

  • Head
    • Economical maintenance, as the tube can be replaced
      for either a detachable or integrated head
    • A high-output photo ionizer that can rapidly neutralize static electricity
  • Controller
    • Displays operation hours of the head
    • Can be connected to external devices using RS-485 communication (Remote Control)
    • Up to 4 head units can be connected
  • Perfect ion balance
  • Free of foreign substances
  • Maintenance free
  • Fast static elimination
  • Ozone free

Application

  • Semiconductors When processing wafers and dies
  • Film Separation/Wounding/
    Transfer section
  • Display Return (transfer) section
  • Plastic Injection/Parts/Materials Feeding
  • Pharmaceutical powder packing 
  • Inside the facility Rubbing machine, exposure machine, etc.

Specification

VSH-12Z / VSC-15Z Product Specifications

Product Item Content
Common Operating temperature 0~40℃
Storage temperature -10℃~60℃
Operating humidity Within 60%
Storage humidity Within 85%
HEAD
(VSH-12Z)		 Tube voltage (DC) 12 kV
Angle of irradiation 150º
Power input DC +24 V
MAX power consumption 16 W
Weight 0.6 kg
CONTROLLER
(VSC-15Z)		 Power input AC 100~240 V, 50/60 Hz
MAX power consumption 100 W
Weight 0.9 kg
I/O Interface Remote, Interlock, Fail
Communications RS-485
I/O Pin Connector DSUB 15P Female
* Design and product specifications are subject to change without notice for quality improvement.

Decay Time Rate

* Static electricity elimination performance is indicated by the time it takes for a metal plate charged at ±1000 V to drop to ±100 V after being irradiated with Soft X-Ray.

Shielding Methods

Material Shielding thickness (mm)
Stainless steel 0.3
Aluminum 5
Glass 7
PVC 6
Acrylic 79
* The above shield thickness is based on when the shield is 10 cm away from the radiation source. If the shield is closer to the radiation source, its thickness must be increased.
* After shielding, the measured external radiation dose must be within the legal limit (10 μSv/h).

Dimensions(mm)

  • Head (VSH-12Z)

  • Controller (VSC-15Z)

Components

Components

  • Head (VSH-12Z) / max. 4ea
  • Controller (VSC-15Z) / 1ea
  • Output Cable (15m) / max. 4ea
  • D-Sub Signal Cable 15pin
    (5m) / 1ea
  • Fixing Bolt
    1/4” X 15L / max. 4ea
    1/4" 20UNC X 8L / max. 4ea
    M4 X 10L / max. 8ea
  • Power Cable (1.8m) / 1ea50,60Hz

Download
Catalogs and manuals are available.